This Liquid Silicone Gel For Electronics is a low viscosity two component condensation silicone sealant that cures at room temperature quickly. It can be applied to the surface of PC (Poly-carbonate), PP, ABS, PVC and other metals and has excellent bonding properties.
Its components are provided in the form of a two-component, low viscosity liquid. Once the two are mixed and cured, they turn into transparent colored, strong, elastic, self-rebounding and resistant materials. It does not form heat while polymerization occurs.
Place of Origin: Guangdong, China (Mainland)
Brand Name: Rongxin
Model Number: RTV-3305
Viscosity Mpa.s: A:2500 B:20
Tear Strength(KN/m): 1.8
Hardness Shore A: 25-30
Tensile Strength(Mpa): 0.5-1.5
Elongation break(%): 150
usage: electronic potting
Break down voltage: ≥15
Specific inductive capacity: 2.7-3.3
Liquid Silicone Gel For Electronics can be used as the silicone gluing of non-slip and heat insulation gloves, non-slip carpet and clothing and textiles. It can also be used in the encapsulation of electronic and electrical components.Using method
The two components should be mixed at a 1 : 1 ratio by weight in clean container. Quick stir to mix well. Vacuum removes air bubbles. Please prepare in advance when using according to the need. Operational time and the vulcanization time can be adjusted according to customer requirements.
Storage and attention
1. Avoid the products contact with the compound containing N,P,S,Pb,Sn,etc.
2. Avoid moisture which will reduce the lifetime.
3. Validity period is more than 6 months. It can be used after the validity period if the test result is up to the standard.