Soft Insole Shoe Foot Cushion Molding Silicone Rubber

This Soft Insole Shoe Foot Cushion Molding Silicone Rubber is an environmentally friendly liquid silicone product that is not easy to burn and will not catch fire. It is made of environmentally friendly non-toxic organic silicone material and refined by advanced technology.

Product Details

Product Description

This Soft Insole Shoe Foot Cushion Molding Silicone Rubber is an environmentally friendly liquid silicone product that is not easy to burn and will not catch fire. It is made of environmentally friendly non-toxic organic silicone material and refined by advanced technology. It consists of liquid silica gel with flowable components of A and B. It is a two-component room temperature vulcanization plus shaped silica gel. This product is highly transparent, easy to operate, resistant to acid and alkali and it has good fluidity, a long service life. It can be cured at room temperature or by heating.

Features:

• High tear strength

• Food grade silicone(environmental, odorless and nontoxic)

• High resistance to high temperature and aging(resist -60 to 150℃)

• High chemical resistance to aggressive components of some types of resins

• Outstanding resistance to common casting resins

Applications:

This product is mainly used in the production of shoe molds, casting sanding, sole sampling, plaster model, perfusion silicone mold, etc., without complex patterns, dimensionally stable and non-deformable product models.

Physical properties of Soft Insole Shoe Foot Cushion Molding Silicone Rubber

Item NO.:

RTV1510

Mix ratio:

1:1

Elongation:

>500%

Color:

Translucent

Tensile strength:

>3.5 MPa

Pot life time:

30-45 min

Hardness:

10±2 A

Shrinkage:

≤0.1 %

Cured time:

6-8 hours

Tear strength:

>16 N/mm

Viscosity:

3000±2000

Warranty:

12 month

Detailed Images

13.png

Usage:

This Soft Insole Shoe Foot Cushion Molding Silicone Rubber is used for painting or scraping. You can fix the product or sole model to be fixed on a flat wooden board with glue. The square is surrounded by wooden boards to prevent the glue from leaking out. Stir the silica gel and the curing agent in a ratio of 100:2, then pour it on the sole model and apply evenly with a wooden board or brush. After the silica gel is dried, the mold frame is filled with gypsum water.


Inquiry