Feet Care Silicone Rubber For Insole Sole Heel

The shrinkage rate of Feet Care Silicone Rubber For Insole Sole Heel is good. Its shrinkage rate is in the thousandth. In addition, it also has good tensile strength, elasticity, and tear. This product has a large flow rate and good fluidity, which can work for a long time. It can produce elastic silicone molds with no deformation, high temperature resistance, acid and alkali resistance and no expansion.

Product Details

The shrinkage rate of Feet Care Silicone Rubber For Insole Sole Heel is good. Its shrinkage rate is in the thousandth. In addition, it also has good tensile strength, elasticity, and tear. This product has a large flow rate and good fluidity, which can work for a long time. It can produce elastic silicone molds with no deformation, high temperature resistance, acid and alkali resistance and no expansion.

Physical properties of Feet Care Silicone Rubber For Insole Sole Heel

Item NO.:

RTV1510

Mix ratio:

1:1

Elongation:

>500%

Color:

Translucent

Tensile strength:

>3.5 MPa

Pot life time:

30-45 min

Hardness:

10±2 A

Shrinkage:

≤0.1 %

Cured time:

6-8 hours

Tear strength:

>16 N/mm

Viscosity:

3000±2000

Warranty:

12 month

Features:

1. It can be used for a long time in the temperature range of -65 ° C - 200 ° C and maintain its soft elastic properties.

2. This silica gel is environmentally friendly and non-toxic, and it is certified by SGS and ROSH.

3. It has excellent electrical properties and chemical stability, low line shrinkage, and it is resistant to water, ozone, weathering, non-corrosive, non-toxic and tasteless, easy to operate and so on.

Applications:

This feet care silicon rubber is suitable for shoe sole molding. It is widely used in hand molding, shoe molds, plaster models, sole sampling, sand casting, etc.

Detailed Images

25.png

Instructions:

Shoe mold silicone can be divided into two parts of A and B. Component A is a white flowing liquid and component B is a curing agent. For example: take 100 grams of silica gel and add 2% curing agent. Then mix the two components A and B evenly. After stirring evenly, the glue is placed in a vacuum box for defoaming, and vacuuming is performed. Finally, vacuum the vacuumed liquid silicone into the product or mold frame you want to copy.

Inquiry