Curing method of cured silicone rubber
Curing silicone rubber is a kind of liquid silicone rubber for filling and sealing all kinds of electronic components, has excellent thermal conductivity and insulation performance, Condensation Cure Silicone Rubber can be used for electronic components fire-retardant, waterproof seismic and other functions, is an effective way to improve the reliability of electronic components potting material. General curing silicone rubber is cured using platinum curing agent, so once the curing agent, even in the sealed environment can be normal curing, Condensation Cure Silicone Rubber in the curing process will not produce any by-products. As long as the mixed cured silicone rubber is placed in room temperature environment, wait a period of time to complete curing, if need to speed up colloid curing speed, you can also put the colloid into the oven heating, heating temperature higher curing speed is faster, Condensation Cure Silicone Rubber in this way to solidify the colloid, cured will not have any adverse effects.
Cured silicone rubber has excellent electrical properties and insulation capacity, widely used in various types of electronic power, can effectively prevent the electronic components by the natural environment erosion, prolong the service life of electronic equipment.
Curing silicone rubber is a a special for the electronics, electrical industry development of the alcohol-curable RTV silicone rubber. Products with nonflammable, single components, Condensation Cure Silicone Rubber room temperature curing, high temperature, environmental protection and other advantages. Is the power adapter, charger and switching power supply and other power products of all parts bonding, fixed, insulation, sealing the best choice to reduce costs and improve efficiency.
Product Characteristics Fast curing: Product table Dry time short (≤10min), deep curing fast, is conducive to fast bonding.
After curing, the rubber layer is elastomer, Condensation Cure Silicone Rubber and the alcohol substance is released after solidification;
Excellent extrusion property, suitable for machine dispensing. Small molecule content is lower than 300ppm;
Has excellent weather resistance, moisture resistance, heat-resistant performance, good electrical insulation performance.
Excellent bonding properties and good adhesion to most metals and plastics, ceramics and glass.
Excellent flame-retardant performance, through the UL94 V0 certification (ul Fileno E343835); fully complies with EU RoHS Directive requirements.