Tin cured silicone rubber for mold making
Tin cured silicone rubber also called condensation-cure silicone, these are high-tear silicone rubbers that are known as the “work horse” of the industry because of their performance and economy. Tin cured silicone molds are used for casting wax, gypsum, polymer modified gypsum, etc. but are best known for standing up to production casting of urethane, epoxy and polyester resins. They are also good for casting low temperature melt metal alloys.
Avoid contact with mucous membranes and eyes. Best method of cleanup is by wiping with disposable paper towels and washing with waterless hand cleaner, then soap and water. If solvents must be used, denatured ethyl alcohol is best, but should be handled with respect for health and flammability hazards.
The information and recommendations in this publication are to the best of our knowledge reliable. However nothing herein is to be construed as a warranty or representation. Users should make their own tests to determine the applicability of such information or the suitability of any products for their own particular purposes. Statements concerning the use of the products described herein are not to be construed as recommending the infringement of any patent and no liability for infringement arising out of any such use is to be assumed.